Automatic Doors Rolling Shutter Strip Making Machine

Home > Blogs

Steel sheeting roof panel roll forming machine Manufacture sheet metal roof tile steel roll forming machine made in China,Automatic Doors Rolling Shutter Strip Making Machine Metal Forming Equipmentwith good quality and favour price!arc bias glazed tile roll forming machine,Colorful tile forming machine,cold roll forming machine,tiles making machine, Stone coated steel roof machine popular in Africa Full auto steel frame stone coated metal roof tile machine.

Rolling doors forming machine

Un-coiler --Pneumatic feeder -- Micro perforation -- Re-coiler

1 Un-coiler (automatic) 2 tons 1
2 Mechanical press machine 1
3 Pneumatic feeder 1
4 Re-coiler (automatic) 1
5 Perforated mould 1

Main component of the line:

NO. name quantity
Main roll former  
1 Un-coiler (2 tons ) MANUAL 1
2 roll former 1
3 Hydraulic cutter 1
4 PLC control cabinet 1
5 Output table with rollers(6 meters) 1

TECHNICAL DETAILS

Un-coiler

1. Capacity: 2 tons

2. Material: #45 steel quenched

3. Inner diameter: 410~ 580mm

Main roll former

1. Stations: 13

2. Rollers material: CR 15; HRC 60. Chrome coated: 0.03~0.05mm. The Strength in Mpa: 70 TON, 800 MPA

3. Shaft material: Diameter: 50mm, material is #45 steel. Quenched: hot treatment. The strength of the Main Shaft in Mpa:70 tons, 650MPA

4. Bearing brand: FAG Germany

5. Main Motor: 5.5 KW, 380V, 50HZ

CHAMICAL COMPOSITION:

  C SI MN P S CR NI CU MO AI V B
Shaft 0.450 0.220 0.540 0.027 0.008 0.050 0.020 0.010 0.000 0.009 0.000 0
Rollers 1.00 0.32 0.33 0.011 0.003 1.49 0.05 0.00 0.02 0.041    
Cutter 1.57 0.34 0.38 0.022 0.010 11.10 0.18 0.14 0.48      
Cut knife 2.04 0.23 0.23 0.020 0.010 11.66 0.12 0.06        

PLC Control Cabinet:

1. Touch screen brand: DELTA

2. PLC brand: DELTA

3. Inverter brand: DELTA

4. Main components for low pressure electricity: Schneider Germany

5. Encoder: Omron

Output table

1. Length: 6 meters

2. Drive type: Rollers

CUTTING PLATFORM

1. Cutting type: Hydraulic system

2. Motor: 4KW; 380V; 50HZ

3. Material of cut die: CR12MOV; Quenched; the Strength in MPA: 950

 

Leave a message