Door Frame Roll Forming Machine With Perforation System

Home > Blogs

curved roof panel roll forming machine manufacture,PLC Control Door Frame Roll Forming Machine With Perforation Systemand it'scustomized design machine.metal galvanized steel profile roof steel roofing wall sheet color trapezoidal aluminum sheet wall panel roll forming machine, Steel C Channel Roll Forming Machine C Z U Shape Profile Section Light Steel Keel Machine machine manufacturers.

rolling doors machine with perforation system by PLC control   Main component of the line:

NO. name quantity
Main roll former  
1 Un-coiler (2 tons ) MANUAL 1
2 roll former 1
3 Hydraulic cutter 1
4 PLC control cabinet 1
5 Output table with rollers(6 meters) 1

TECHNICAL DETAILS

Un-coiler

1. Capacity: 2 tons

2. Material: #45 steel quenched

3. Inner diameter: 410~ 580mm

Main roll former

1. Stations: 13

2. Rollers material: CR 15; HRC 60. Chrome coated: 0.03~0.05mm. The Strength in Mpa: 70 TON, 800 MPA

3. Shaft material: Diameter: 50mm, material is #45 steel. Quenched: hot treatment. The strength of the Main Shaft in Mpa:70 tons, 650MPA

4. Bearing brand: FAG Germany

5. Main Motor: 5.5 KW, 380V, 50HZ

CHAMICAL COMPOSITION:

  C SI MN P S CR NI CU MO AI V B
Shaft 0.450 0.220 0.540 0.027 0.008 0.050 0.020 0.010 0.000 0.009 0.000 0
Rollers 1.00 0.32 0.33 0.011 0.003 1.49 0.05 0.00 0.02 0.041    
Cutter 1.57 0.34 0.38 0.022 0.010 11.10 0.18 0.14 0.48      
Cut knife 2.04 0.23 0.23 0.020 0.010 11.66 0.12 0.06        

PLC Control Cabinet:

1. Touch screen brand: DELTA

2. PLC brand: DELTA

3. Inverter brand: DELTA

4. Main components for low pressure electricity: Schneider Germany

5. Encoder: Omron

Output table

1. Length: 6 meters

2. Drive type: Rollers

CUTTING PLATFORM

1. Cutting type: Hydraulic system

2. Motor: 4KW; 380V; 50HZ

3. Material of cut die: CR12MOV; Quenched; the Strength in MPA: 950

Un-coiler --Pneumatic feeder -- Micro perforation -- Re-coiler

1 Un-coiler (automatic) 2 tons 1
2 Mechanical press machine 1
3 Pneumatic feeder 1
4 Re-coiler (automatic) 1
5 Perforated mould 1

 

Leave a message